Compare Claro to ANSR Acne Clearing Devices

Clear your pimples – one at a time.  The Claro Skin Clarifying System
icon is easy to use and uses both heat and light to clear pimples.  You get blue light and red light. See how it works.

Claro works for 6 seconds.  Let your skin cool down for 5 minutes.  Repeat the 6 second process again.  Treatments should be applied twice a week for at least 8 weeks.  Remember – this is per pimple.  If you have 3 pimples, repeat this procedure for each one. 

ANSR also clears pimples – one at a time. You get both blue light and red light with this one. But you don’t get heat. ANSR gives you free topicals with the light.  Apply the blue light for 5 minutes, then apply the red light for 5 minutes for each pimple.  If you are lucky, your pimples will be close together and you can get the effect by applying it only once.  But if your pimples are far apart, you will need to repeat this process again.  The treatment should be repeated two or three times a week for 8 weeks to get the best results.  See how it works.

Share

One Comment

  1. Posted September 16, 2010 at 4:28 pm | Permalink

    I’m the CEO of CLRS makers of the CLARO and I wanted to clear up possible confusion over our treatment recommendations. We recommend 3 treatments (about 6 seconds each) over 24 hours. That’s it.

    CLARO has been tested in two clinical trials that have shown about 90% of pimples resolve in 24 hours or less and the CLARO is an FDA cleared device. ANSR has never been clinically tested and has not been approved by the FDA.

Post a Comment

You must be logged in to post a comment.